英國BURKARD SCIENTIFIC公司創建于上世紀50年代，致力于農業及農藥生測的儀器設計、生產及研發工作，其產品占據全球同類型儀器的絕大部分市場，被全球眾多農業研究實驗室所選用及推崇。

英國Burkard手動微量點滴儀PDE0003 ，適用于水稻的稻飛虱研究，適用于蒼蠅和蚊子幼蟲研究等！

可變滴量微量施藥器裝有一個1毫升Burkard注射器，采用luer式安裝，可通過滑動一個選擇控制旋鈕來選擇點滴量，點滴量有0.25，0.5，1，2和5μl可供選擇。

施藥器由不含鐵的材料構成，其組成部分經極度陽極處理或電鍍為光亮的鉻合金磨光表面，其組裝方式靈活，在使用中可夾固于任何位置。10毫升注射器和施藥器可供應的點滴量為50μl。

PDE0003技術參數：

Burkard 1ml 注射器的注射量為500ul

總高度：9cm(3.5in)

總寬度：12.7cm(5in)

總長度：15.2cm(6in)

底座尺寸：10 x15cm(4 x6in)

凈重：1.35kg(3lb)

毛重：1.92kg(4.2lb)

Product Description

Five different drop sizes may be selected by sliding a single selector control knob. Depressing the control knob permits free rotation of the main drum. Drop sizes range from 0.25 microlitres when fitted with all-glass syringes.

Construction and Equipment Details

The Applicator is constructed from non-ferrous materials with all components either hard anodised or electro-plated in satin chrome finish.

Drop sizes normally available are 0.25, 0.5, 1, 2 and 5 microlitres and selection is quick and simple.

Ten times the volumes shown can be obtained by the use of 10 ml all glass syringes

Hand microapplicator
The BURKARD all-glass syringe is clamped or released by turning a single knurled screw and the 10 ml syringes are supplied complete with adapter for mounting direct into the cover tube.
The mounting of the applicator enables it to be clamped in any position during use.

The following equipment is supplied as standard:

One BURKARD all-glass syringe.
Two hypodermic needles.

Extra Equipment: 10 ml all-glass syringe complete with stainless steel mounting sleeve.